360直播吧

Categories
Contact Us

SHENZHEN SINOLI ELECTRONIC CO., LTD.

HQ Addr.:FLAT/RM 704 7/F, BRIGHT WAY TOWER, 33 MONG KOK ROAD, MONG KO,KL, HK

Office Addr.: No. 502, FL 5th, Blog A#, LingNan Creative Valley, ShiYan Street, BaoAn Distric, Shenzhen City

Factory Addr.: B# 5Fl, Ming Jinhai Group the First Industrial Park, Tangtou Road, Shiyan Town, Baoan District, Shenzhen city, Guangdong Province, China.

Landline: +86-755-6660-5507

Fax: +86-755-6660-5507

Whatsapp/Wechat: +8618665676364

E-mail: info@efrees.com

Website:

Service Hotline
+86-755-6660-5507

Exhibition

Home > ExhibitionContent

LITHIUM ION BATTERY FREQUENTLY ASKED QUESTIONES IV

Shenzhen Sinoli Electronic Co.,Ltd | Updated: Sep 16, 2018

LITHIUM ION BATTERY FREQUENTLY ASKED QUESTIONES IV:


Q68: What is a drop test?

 

Drop the battery or battery pack three times from 1m high to the concrete (or cement) floor to get random impact.

 

Q69: What is a vibration experiment?

The vibration test method of ni-mh battery is as follows:

 

After the battery is discharged from 0.2c to 1.0v, it will be charged for 16 hours with 0.1c, and vibrate under the following conditions after being suspended for 24 hours:

 

Amplitude: 0.8 mm

 

Make the battery vibrate between 10hz-55hz, increasing or decreasing with the vibration rate of 1HZ per minute.

 

Battery voltage change should be between + / - 0.02 V, within + / - 5 m Ω resistance change. (vibration time in 90min)

 

The vibration test method of lithium battery is as follows:

 

After the battery is discharged at 0.2c to 3.0v, 1C is charged at 4.2v with constant current and constant pressure, and the cut-off current is 10mA. After 24 hours, the battery will vibrate according to the following conditions:

 

The vibration experiment was conducted with the vibration frequency ranging from 10 Hz to 60 Hz to 10 Hz in 5 minutes, and the amplitude was 0.06 inches. The battery vibrates on three axes for half an hour.

  

Battery voltage change should be between + / - 0.02 V, within + / - 5 m Ω resistance change.

What is a crash test?

 

When the battery is fully charged, place a hard rod across the battery. Drop a 20-pound weight from a certain height and hit the hard rod. The battery should not explode or catch fire.

 

Q70: What is a penetration test?

 

When the battery is fully charged, use a nail of a certain diameter through the center of the battery and leave the nail in the battery. The battery should not explode or catch fire.

 

Q71: What is the fire test?

A fully charged battery is burned on a heating device with a special protective cover, which is free of debris.